All Issue

2018 Vol.31, Issue 4 Preview Page
Multiscale Virtual Testing Machines of Concrete and Other Composite Materials: A Review

콘크리트 및 복합재료용 멀티스케일 가상 시험기계에 관한 소고

Bezawit F. Haile1
,
S.M. Park1
,
B.J. Yang2
,
H.K. Lee1†
Bezawit F. Haile1
,
박 솔 뫼1
,
양 범 주2
,
이 행 기1†
1Department of Civil and Environmental Engineering, Korea Institute of Science and Technology(KAIST), Daejeon 34141, Korea
2Institute of Advanced Composite Materials, Korea Institute of Science and Technology(KIST), Jeonbuk, 55324, Korea
1한국과학기술원 건설 및 환경공학과
2한국과학기술연구원 복합소재기술연구소
†Corresponding author: Tel: +82-42-350-5663; E-mail leeh@kaist.ac.kr
2018. pp. 173-181
PDF XML Citation
Abstract

Recently composite materials have dominated most engineering fields, owing to their better performance, increased durability and flexibility to be customized and designed for a specific required property. This has given them unprecedented superiority over conventional materials. With the help of the ever increasing computational capabilities of computers, researchers have been trying to develop accurate material models for the complex and integrated properties of these composites. This has led to advances in virtual testing of composite materials as a supplement or a possible replacement of laboratory experiments to predict the properties and responses of composite materials and structures. This paper presents a review on the complex multi-scale modelling framework of the virtual testing machines, which involve computational mechanics at various length-scales starting with nano-mechanics and ending in structure level computational mechanics, with a homogenization technique used to link the different length scales. In addition, the paper presents the features of some of the biggest integrated virtual testing machines developed for study of concrete, including a multiscale modeling scheme for the simulation of the constitutive properties of nanocomposites. Finally, the current challenges and future development potentials for virtual test machines are discussed.

Keywords
virtual testing machines
concrete modeling
multiscale modeling
composites

최근 복합재료는 향상된 성능, 내구성 및 여러 특정 요구성능에 대한 설계 유연성으로 인해 다양한 분야에서 활발히 활용 되고 있다. 컴퓨터 성능이 발달함에 따라, 복합재료의 복잡한 거동에 대한 정확도 높은 모델 역시 함께 연구되고 있으며, 이 로 인해 가상시험이 복합재료 거동에 대한 실험을 대체하거나 보충하는데 중요한 역할을 하고 있다. 본 논문에서는 나노수 준부터 구조물 단위까지 이르는 다양한 length scale의 homogenization을 통한 멀티스케일 모델링에 대한 문헌을 분석하였 다. 또한, 콘크리트 거동 연구에 대한 통합모델의 특징을 다루었으며, 가상 시험기계에 대한 최근 연구동향 및 전망에 대하 여 다루었다.

키워드
가상 시험기계
멀티 스케일 모델링
복합 재료
콘크리트 모델링
References
1
Ahn, T.S., Ha, Y.D. (2017) Study on Peridynamic Interlayer Modeling for Multilayered Structures, J. Comput. Struct. Eng. Inst. Korea, 30(5), pp.389~ 396. 10.7734/COSEIK.2017.30.5.389
10.7734/COSEIK.2017.30.5.389
2
Aivazis, M., Goddard, W.A., Meiron, D., Ortiz, M., Pool, J., Shepherd, J. (2000) A Virtual Test Facility for Simulating Thermodynamic response of Materials, Comput. Sci. &Eng., 2(2), pp.42-53.1521-9615
10.1109/5992.825748
3
Akpoyomare, A.I., Okereke, M.I., Bingley, M.S. (2017) Virtual Testing of Composites: Imposing Periodic Boundary Conditions on General Finite Element Meshes, Compos. Struct.,　160(15),　pp.983 ~994. 10.1016/j.compstruct.2016.10.1140263-8223
10.1016/j.compstruct.2016.10.114
4
Bentz, D.P. (1997)　Three-Dimensional Computer Simulation of Portland Cement Hydration and Microstructure Development, J. Am. Ceram. Soc., 80(1) pp.3~21. 10.1111/j.1151-2916.1997.tb02785.x0002-7820
10.1111/j.1151-2916.1997.tb02785.x
5
Bernard, O., Ulm, F., Lemarchand, E. (2003) A Multiscale Micromechanics-Hydration Model for the Early-age Elastic Properties of Cement-Based Materials, Cement &Concr. Res., 33(9), pp.1293~ 1309. 10.1016/S0008-8846(03)00039-50008-8846
10.1016/S0008-8846(03)00039-5
6
Bullard, J.W. (2016)Virtual Cement and Concrete Testing Laboratory: Version 9.5 User Guide, National Institute of Standards and Technology, Special　Publication SP 1173, p.60.
7
Bullard, J.W., Stutzman, P.E., Belloc, L.M.O., Garboczi, E.J., Bentz, D.P. (2009) Virtual Cement and Concrete Testing Laboratory for Quality Testing and Sustainability of Concrete,　 National Institute of Standards and Technology,　 Special　Publication SP 266. pp.27-36.
8
California Institute of Technology (2017) The Virtual Test Facility, VTF. Retrieved from　http:// www.vtf.website/asc/wiki/bin/view/
9
Charalambakis, N. (2010) Homogenization Techniques and Micromechanics, A Survey and Perspectives, Applied Mechanics Reviews, 63, pp.1-10. 10.1115/1.40019110003-6900
10.1115/1.4001911
10
Chong, K.P.,　Garboczi, E.　(2002)　Smart and Designer Structural Material System, Prog. Struct. Eng. Mater., 4(4), pp.417-430. 10.1002/pse.1341365-0556
10.1002/pse.134
11
Cox, B., Yang, Q. (2006) In Quest of Virtual Tests for Structural Composites, Sci., 314(5802), pp.1102~ 1107. 10.1126/science.113162417110566
10.1126/science.113162417110566
12
Deiterding, R. Radovitzky, R. Mauch, S.P., Noels, L, Cummings, J.C., Meiron, D.I (2006) A Virtual Test Facility for the Efficient Simulation of Solid Material Response under Strong Shock and Detonation Wave Loading, Eng. Comput., 22(3-4) pp.325~347. 10.1007/s00366-006-0043-90264-4401
10.1007/s00366-006-0043-9
13
González, C. , LLorca, J. (2007) Virtual Fracture Testing of Composites: A Computational Micromechanics Approach, Eng. Fract. Mech., 74(7), pp.1126~ 1138. 10.1016/j.engfracmech.2006.12.0130013-7944
10.1016/j.engfracmech.2006.12.013
14
Ha, S.K., Yang, B.J., Lee, H.K., (2009) Finite Element Analysis for Evaluating the Performance of RC Beams Strengthened with SFRP Coating, J. Comput. Struct. Eng. Inst. Korea, 22(6), pp.579~585.
15
Hoekstar A. , Chopard B., Coveney, P. (2014) Multiscale Modeling and Simulation: A Position Paper, Phil. Trans. R. Soc., A372, 20130377. 10.1098/rsta.2013.0377
10.1098/rsta.2013.037724982256
16
Ishida, T.,　Tsuchiya, S.,　Chaube, R.P. (2005) "DUCOM DEMO" (August 2, 2017)Retrieved from http://concrete.t.u-tokyo.ac.jp/en/demos/ducom/.
17
Jennings, H.M., Johnson, S.K. (1986) Simulation of Microstructure Development during the Hydration of a Cement Compound, J. Am. Ceram. Soc., 69(11), pp.790~795. 10.1111/j.1151-2916.1986.tb07361.x0002-7820
10.1111/j.1151-2916.1986.tb07361.x
18
Jordan, J., Jacob, K.I., Tannenbaum, R., Sharaf, M.A., Jasiuk, I. (2005) Experimental trends in polymer nanocomposites-a review, Materials Science and Engineering. A 393, 1. 10.1016/j.msea.2004.09.0440921-5093
10.1016/j.msea.2004.09.044
19
Lee, H.K., Pyo, S.H. (2008) Multi-Level Modeling of Effective Elastic Behavior and Progressive Weakened Interface in Particulate Composites, Compos. Sci. &Tech., 68(2), pp.387~397. 10.1016/j.compscitech.2007.06.0260266-3538
10.1016/j.compscitech.2007.06.026
20
Lee, H.K. (2001) A Computational Approach to the Investigation of Impact Damage Evolution in Discontinuously Reinforced Fiber Composites, Comput. Mech., 27(6), pp.504~512. 10.1007/s0046601002620178-7675
10.1007/s004660100262
21
Liang, Z., Lee, H.K, Suaris, W. (2006) Micromechanics based Constitutive Modeling for Unidirectional Laminated　Composites, Int. J. Solids &Struct., 43(18-19), pp.5674~5689. 10.1016/j.ijsolstr.2005.08.0200020-7683
10.1016/j.ijsolstr.2005.08.020
22
Llorca, J., González, C., Molina-Aldareguía, J. M., Segurado, J., Seltzer, R., Sket, F., Canal, L.P. (2011) Multiscale Modeling of Composite Materials: A Roadmap Towards Virtual Testing, Adv. Mater., 23(44), pp.5130~5147. 10.1002/adma.201101683219719550935-9648
10.1002/adma.20110168321971955
23
Materials: A Roadmap Towards Virtual Testing, Adv. Mater., 23(44), pp.5130~5147. 10.1002/adma.201101683219719550935-9648
24
Maekawa, K., Ishida, T., Kishi, T. (2003) Multiscale Modeling of Concrete Performance Integrated Material and Structural Mechanics, J. Adv. Concr. Technol., 1(2), pp.91~126.
10.3151/jact.1.91
25
Nilsen, A.U., Monteiro, P.J.M. (1993) Concrete: A Three Phase Material. Cement and Concrete Research, 23, pp.147~151. 10.1016/0008-8846(93)90145-Y0008-8846
10.1016/0008-8846(93)90145-Y
26
Oden, J.T., Belytschko,T., Babuska, I., Hughes, T.J.R. (2003)　Research Directions in Computational Mechanics, Comput. Methods Appl. Mech. &Eng., 192(7-8), pp.913~922. 10.1016/S0045-7825(02)00616-30045-7825
10.1016/S0045-7825(02)00616-3
27
Oden, J.T., Prudhomme, S., Romkes, A., Bauman, P.T. (2006) Multiscale Modeling of Physical Phenomena: Adaptive Control of Models, SIAM J. Scien. Comput., 28(6), pp.2359~2389. 10.1137/0506324881064-8275
10.1137/050632488
28
Okereke, M., Petrinic, N., Wiegand, N., R. Gerlach., S.iviour, C. (2008) Virtual Testbed for Numerical Homogenization of Elastic Behavior and Damage Initiation in Bidirectional Composites, Proceedings of Research: 8th World Congress on Computational　Mechanics　(June30-July5, 2008) Italy, pp.1~3
29
Okereke, M.I., Akpoyomare, A.I. (2013) A virtual Framework for Prediction of Full-Field Elastic Response of Unidirectional Composites, Comput. Mater. Sci., 70, pp.82~99. 10.1016/j.commatsci.2012.12.0360927-0256
10.1016/j.commatsci.2012.12.036
30
Okereke, M. I., Akpoyomare, A. I., Bingley, M. S. (2014) Virtual Testing of Advanced Composites, Cellular Materials and Biomaterials: A Review, Compos. Part B: Eng., 60, pp.637~662.
10.1016/j.compositesb.2014.01.007
31
Qu, J., Cherkaoui, M. (2006) Fundamentals of Micromechanics of Solids, New Jersey: John Wiley &Sons, Inc., Hoboken. 10.1002/9780470117835
10.1002/9780470117835
32
Wittmann, F.H., Roelfstra, P.E., Sadouki. H. (1985) Simulation and Analysis of Composite Structures, Mater. Sci. &Eng., 68(2), pp.239~248. 10.1016/0025-5416(85)90413-60025-5416
10.1016/0025-5416(85)90413-6
33
Yang, B.J., Ha, S.K., Lee, H.K. (2012) Micromechanicsbased Analysis on Tensile behavior of the Sprayed FRP Composites with Chopped Glass Fibers, J. Comput. Struct. Eng. Inst. Korea, 25(3), pp.211~ 217. 10.7734/COSEIK.2012.25.3.211
10.7734/COSEIK.2012.25.3.211
34
Yang, B.J., Hwang, Y.Y., Lee, H.K. (2013) Elastoplastic Modeling of Polymeric Composites Containing Randomly Located Nanoparticles with an Interface Effect, Compos. Struct., 99, pp.123~130. 10.1016/j.compstruct.2012.11.0430263-8223
10.1016/j.compstruct.2012.11.043
35
Yang, B.J., Shin, H., Lee, H.K., Kim, H. (2013) A Combined Molecular Dynamics / Micromechanics / Finite Element Approach for Multiscale Constitutive Modeling of Nanocomposites with Interface Effects, App. Phys. Lett., 103(24), 241903. 10.1063/1.48193830003-6951
10.1063/1.4819383
36
Zhu, L., Narh, K.A. (2004) Numerical Simulation of the Tensile Modulus of Nanoclay‐Filled Polymer Composites, J. Polym. Sci. Part B: Polym. Phys. 42(12), pp.2391~2406. 10.1002/polb.201120887-6266
10.1002/polb.20112
Information
  • Publisher :Computational Structural Engineering Institute of Korea
  • Publisher(Ko) :한국전산구조공학회
  • Journal Title :Journal of the Computational Structural Engineering Institute of Korea
  • Journal Title(Ko) :한국전산구조공학회 논문집
  • Volume : 31
  • No :4
  • Pages :173-181
  • Received Date : 2018-04-30
  • Revised Date : 2018-05-30
  • Accepted Date : 2018-07-09
  • DOI :https://doi.org/10.7734/COSEIK.2018.31.4.173
Journal Informaiton Journal of the Computational Structural Engineering Institute of Korea Journal of the Computational Structural Engineering Institute of Korea
Online Submission
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close