Study on Vibration Characteristics in Terms of Airfoil Cross-Sectional Shape by using Co-Rotational Plane Beam Transient Analysis

Se-Ill Kim; Yong-Se Kim; Chul-Woo Park; Sang Joon Shin

doi:10.7734/COSEIK.2016.29.5.389

All Issue

2016 Vol.29, Issue 5 Preview Page Next Page

Study on Vibration Characteristics in Terms of Airfoil Cross-Sectional Shape by using Co-Rotational Plane Beam Transient Analysis Co-Rotational 보의 과도상태해석을 이용한 에어포일 단면 형상 변화에 따른 진동특성 연구

2016. pp. 389-395

PDF XML

Abstract

In this paper, vibration characteristics in terms of the airfoil cross-sectional shape was examined by using the EDISON co-rotational plane beam-transient analysis. Co-Rotational plane beam analysis is appropriate for large rotation and small strain. Assuming aircraft wing as a cantilevered beam, natural frequencies of each airfoil cross-sectional shape were estimated using VABS program and fast Fourier transformation(FFT). VABS conducts finite element analysis on the cross-section including the detailed geometry and material distribution to estimate the beam sectional properties. Under the same airfoil geometric configuration and material selection, variation of material induced difference in the deflection and natural frequencies. It was observed that variation of the natural frequency was dependent on variation of the airfoil shape and material.

Keywords

FFT

Co-Rotational plane beam element

vibration

deflection

natural frequency

airfoil

본 논문에서는 Co-Rotational plane beam transient analysis EDISON program(CR-보)를 이용한 에어포일 단면형상 변화 에 따른 진동특성 연구를 수행하였다. Co-Rotational 평면 보 해석은 대 회전과 작은 변형률을 갖는 보 해석에 적합하다. 항 공기의 날개를 외팔보로 가정하여, VABS를 통한 단면해석과 Fourier 변환을 통해 각 단면형상 변화에 따른 에어포일의 고 유진동수를 비교하였다. VABS를 사용하여 단면의 형상과 재료의 적층 정보를 고려한 단면에서의 유한요소 해석을 수행하 였다. 에어포일의 재질, spar 유무, 단일 등방성 재료·복합재료, 에어포일 최대두께의 변화에 따라 에어포일의 끝단 진폭과 고유진동수가 변화함을 확인할 수 있었다. 이를 바탕으로 에어포일 고유진동수 변화는 2차 관성모멘트/단면적, 밀도, 영률의 변화에 상당한 영향을 받음을 알 수 있었다.

키워드

FFT

Co-Rotational 평면 보 요소

진동

변위

고유진동수

에어포일

References

References

P Barun and KD Santosha, Based Design of Struct. & Mach, Nonlinear Vibrations and Frequency Response Analysis of a Cantilever Beam under Periodically varing Magnetic Field, Mech, 39; 378-391 (2011)

10.1080/15397734.2011.557972

RR Craig Jr and AJ Kurdila, 2nd Edition. Fundamentals of Structural Dynamics; 200-205 (2006)

AS Daniel, A Modeling study of the Sensitivity of Natural Frequency of Vibration to Geometric Variations in a Turbine Blade, CT. Rensselaer Polytechnic Institute Hartford. (2010)

M Di Sciuva, J. Sound & Vib, Bending, Vibration and Buckling of Simply Supported Thick Multilayered Orthotropic Plates: An Evaluation of a New Displacement Model, 105; 425-442 (1986)

10.1016/0022-460X(86)90169-0

P Kamlesh and B Manish, Eng. J, Determination of Natural Frequency of Aerofoil Section Blades Using Finite Element Approach, Study of Effect of Aspect Ratio and Thickness on Natural Frequency, 17(2) (2012)

MJ Kim and NC Kang, KSNVE, Vibration Analysis of a Rotating Cantilever Beam with Tip Mass Using DTM, 20; 1058-1063 (2010)

10.5050/ksnve.2010.20.11.1058

TN Le, JM Battini and M Hjiaj, Comput. Mech, Efficient Formulation for Dynamics of Corotational 2D Beams, 48(2); 153-161 (2011)

10.1007/s00466-011-0585-6

CW Park and HS Joo, J. Comput. Struct. Eng. Inst. Korea, Study on Cantilever Beam Tip Response with Various Harmonic Frequencies by Using EDISON Co-rotational Plane Beam-Dynamic Tip Load, 28(5); 477-484 (2010)

10.7734/COSEIK.2015.28.5.477

SR Singiresu, 5th Edition. Mechanical Vibrations; 721-728 (2011)

K Swalwell, J Sheridan and WH Melbourne, Frequency Analysis of Surface Pressures on an Airfoil After Stall21st AIAA Applied Aerodynamics Conference, Orlando, Florida-2003-3416; 2003-3416 (2003)

10.2514/6.2003-3416

DL Thomas, JM Wilson and RR Wilson, J. Sound & Vib, Timoshenko Beam Finite Elements, 31(3); 315-330 (1973)

10.1016/S0022-460X(73)80276-7

Information

Publisher :Computational Structural Engineering Institute of Korea
Publisher(Ko) :한국전산구조공학회
Journal Title :Journal of the Computational Structural Engineering Institute of Korea
Journal Title(Ko) :한국전산구조공학회 논문집
Volume : 29
No :5
Pages :389-395
Received Date : 2016-05-11
Revised Date : 2016-08-02
Accepted Date : 2016-08-03
DOI :https://doi.org/10.7734/COSEIK.2016.29.5.389

Journal of the Computational Structural Engineering Institute of Korea ISSN:1229-3059(Print) 2287-2302(Online) 한국전산구조공학회 논문집

All Issue

References