Development of a Shear Yielding Steel Damper for Concentrically Braced Frames

Ali Ghamari; Seong-Hoon Jeong

doi:10.7734/COSEIK.2021.34.6.437

All Issue

2021 Vol.34, Issue 6 Preview Page

Research Paper

Development of a Shear Yielding Steel Damper for Concentrically Braced Frames 중심가새골조의 내진성능향상을 위한 전단항복댐퍼의 개발

31 December 2021. pp. 437-443

PDF XML

Abstract

In this study, the use of a steel yielding damper is considered as an appropriate method to enhance the behavior of CBFs and a steel damper which is economical and straightforward to construct and replace after a severe earthquake is developed. The proposed damper was investigated experimentally and numerically. In addition, a parametric study was performed to evaluate the effect of the three types of damper mechanisms (shear, shear-flexural, and flexural) on the behavior of the proposed damper. The experimental results, as well as the numerical results, indicate that the shear damper exhibits better performance than the other dampers in terms of strength and stiffness.

Keywords

steel yield damper

shear yielding

brace

hysteresis

본 논문에서는 중심가새골조의 내진성능 향상을 위한 전단항복 댐퍼의 개발을 수행하였다. 실용성이 높은 댐퍼의 개발을 위해서 구조적 간결성과 내진성능의 신뢰도에 중점을 둔 상세를 제시하기 위해 노력하였다. 지진 발생 시 에너지 소산 메커니즘에 대한 신뢰도가 높고, 지진 발생 후 항복 부위의 교체가 쉬운 형태로 고안되었다. 댐퍼의 끼움강판 치수를 변경함으로써 전단, 휨-전단, 휨 메커니즘을 조절하여 설계할 수 있다. 비선형 유한요소해석을 통해서 댐퍼의 항복 메커니즘에 따른 구조적 거동을 분석하였고, 전단항복 메커니즘 댐퍼가 휨항복 메커니즘 댐퍼에 비해 강성, 강도, 에너지 소산 측면에서 우수한 성능을 가지고 있음을 확인하였다.

키워드

강재이력댐퍼

전단항복

가새

이력거동

References

Bouwkamp, J., Vetr, M.G., Ghamari, A. (2016) An Analytical Model for Inelastic Cyclic Response of Eccentrically Braced Frame with Vertical Shear Link (V-EBF), Case Stud. Struct. Eng., 6, pp.31~44. 10.1016/j.csse.2016.05.002

Deng, K., Pan, P., Wang., C. (2013) Development of Crawler Steel Damper for Bridges, J. Constr. Steel Res., 85, pp.140~150. 10.1016/j.jcsr.2013.03.009

Ghadami, A., Pourmoosavi, G., Ghamari, A. (2021) Seismic Design of Elements Outside of the Short Low-Yield-Point Steel Shear Links, J. Consrt. Steel Res., 178, 106489. 10.1016/j.jcsr.2020.106489

Hu, S., Wang, W., Qu, B. (2020) Seismic Evaluation of Low-Rise Steel Building Frames with Self-Centering Energy-Absorbing Rigid Cores Designed using a Force-Based Approach, Eng. Struct., 204, pp.110~138. 10.1016/j.engstruct.2019.110038

Jaisee, S., Yue, F., Ooi, Y. (2021) A State-of-the-Art Review on Passive Friction Dampers and Their Applications, Eng. Struct., 235, pp.112~122. 10.1016/j.engstruct.2021.112022

Kumar, M., Senthilkumar, R., Sourabha, L. (2019) Seismic Performance of Special Concentric Steel Braced Frames, Struct., 20, pp.166~175. 10.1016/j.istruc.2019.03.012

Park, H., Oh, S. (2020) Structural Performance of Beam System with T-Stub Type Slit Damper, Eng. Struct., 205, 109858. 10.1016/j.engstruct.2019.109858

Richards, P.W., Uang, C.M. (2005) Effect of Flange Width- Thickness Ratio on Eccentrically Braced Frames Link Cyclic Rotation Capacity, J. Struct. Eng., 131(10), pp.1546~1552. 10.1061/(ASCE)0733-9445(2005)131:10(1546)

Roeder, C.W., Popov, E.P. (1978) Eccentrically Braced Steel Frames for Earthquakes, J. Struct. Div., 104(3), pp.391~412. 10.1061/JSDEAG.0004875

Symans, M.D., Charney, F.A., Whittaker, A.S., Constantinou, M.C., Kircher, C.A., Johnson, M.W., McNamara, R.J. (2008) Energy Dissipation Systems for Seismic Applications: Current Practice and Recent Developments, J. Struct. Eng., 134(1), pp.3~21. 10.1061/(ASCE)0733-9445(2008)134:1(3)

Vetr, M.G., Ghamari, A. (2019) Experimentally and Analytically Study on Eccentrically Braced Frame with Vertical Shear Links, Struct. Des. Tall & Spec. Build., 28, pp.15~87. 10.1002/tal.1587

Vetr, M.G., Ghamari, A., Bouwkamp, J. (2017) Investigating the Nonlinear behavior of Eccentrically Braced Frame with Vertical Shear Links (V-EBF), J. Build. Eng., 10, pp.47~59. 10.1016/j.jobe.2017.02.002

Wang, C., Qing, Y., Wu, Y., Wang, J., Gu, Z. (2020) Analytical and Experimental Studies on Buckling-Restrained Brace with Gap-Supported Tendon Protection, J. Constr. Steel Res., 164, 105807. 10.1016/j.jcsr.2019.105807

Yang, T.Y., Sheikh, H., Tobber, L. (2019) Influence of the Brace Configurations on the Seismic Performance of Steel Concentrically Braced Frames, Front. Built Environ., 5, pp.1~27. 10.3389/fbuil.2019.00027

Zahrai, S.M. (2015) Cyclic Testing of Chevron Braced Steel Frames with IPE Shear Panels, Steel & Compos. Struct., 19 (5), pp.1167~1184. 10.12989/scs.2015.19.5.1167

Information

Publisher :Computational Structural Engineering Institute of Korea
Publisher(Ko) :한국전산구조공학회
Journal Title :Journal of the Computational Structural Engineering Institute of Korea
Journal Title(Ko) :한국전산구조공학회 논문집
Volume : 34
No :6
Pages :437-443
Received Date : 2021-11-09
Revised Date : 2021-11-19
Accepted Date : 2021-11-22
DOI :https://doi.org/10.7734/COSEIK.2021.34.6.437

Journal of the Computational Structural Engineering Institute of Korea ISSN:1229-3059(Print) 2287-2302(Online) 한국전산구조공학회 논문집

All Issue