Multi-component Topology Optimization Considering Joint Distance

Jun Hwan Kim; Gil Ho Yoon

doi:10.7734/COSEIK.2022.35.6.343

All Issue

2022 Vol.35, Issue 6 Preview Page Next Page

Research Paper

Multi-component Topology Optimization Considering Joint Distance 조인트 최소거리를 고려한 다중구조물 위상최적설계 기법

31 December 2022. pp. 343-349

PDF XML

Abstract

This paper proposes a new topology optimization scheme to determine optimized joints for multi-component models. The joints are modeled as zero-length high-stiffness spring elements. The spring joints are considered as mesh-independent springs based on a joint-element interpolation scheme. This enables the changing of the location of the joints regardless of the connected nodes during optimization. Because the joints are movable, the locations of the optimized joints should be aggregated at several points. In this paper, the novel joint dispersal (JD) constraint to prevent joint clustering is proposed. With the joint dispersal constraint, it is possible to determine the optimized joint location as well as optimized topologies while maintaining the minimum distance between each joint. The mechanical compliance value is considered as the objective function. Several topology optimization examples are solved to demonstrate the effect of the joint dispersal constraint.

Keywords

topology optimization

multi-component modeling

spring joint connection

joint-element interpolation

본 논문에서는 구조물이 다중 구조물로 연결되는 경우 연결부의 조인트 위치를 기존의 위상최적설계 기법을 활용해 설계하는 기법을 개발하였다. 조인트는 길이가 0이고 강성이 매우 강한 스프링으로 모델링되었으며, 조인트는 유한요소 메시 형상과 무관하게 이동할 수 있도록 모델링되었다. 최적화 과정에서 조인트가 서로 뭉치는 현상을 방지하기 위해 조인트 최소거리 조건을 추가해 조인트간의 최소거리가 확보된 설계를 얻었다. 최적설계 시 목적함수로는 전체 구조물의 compliance 값이 사용되었으며, 조인트 최소거리 조건에 따른 결과를 비교하기 위해 2개의 수치예제를 해석하였다. 위상최적설계 결과 조인트 최소거리 조건의 변화에 따라 조인트 및 구조물의 최적 형상을 얻을 수 있었다.

키워드

위상최적설계

다중구조물 모델링

스프링 조인트 연결

조인트-요소 보간

References

Ambrozkiewicz, O., Kriegesmann, B. (2021) Simultaneous Topology and Fastener Layout Optimization of Assemblies Considering Joint Failure, Int. J. Numer. Methods Eng., 122(1), pp.294~ 319. 10.1002/nme.6538

Chickermane, H., Gea, H.C. (1996) Design of Multi-Component Structural Systems for Optimal Layout Topology and Joint Locations, Eng. Comput., 13, pp.235~243. 10.1007/BF01200050

Kim, J.H., Choi, Y.H., Yoon, G. (2022) Development of a Joint Distance Constraint for Optimized Topology and Optimized Connection for Multiple Components, Eng. Optimiz., pp.1~21. 10.1080/0305215X.2022.2089879

Li, Q., Steven, G.P., Xie, Y.M. (2001) Evolutionary Structural Optimization for Connection Topology Design of Multi‐Component Systems, Eng. Comput., 18, pp.460-479. 10.1108/02644400110387127

Sigmund, O. (2001) A 99 Line Topology Optimization Code Written in Matlab, Int. J. Numer. Methods Eng., 21(2), pp.120~127. 10.1007/s001580050176

Svanberg, K. (1987) The Method of Moving Asymptotes-a New Method for Structural Optimization, Int. J. Numer. Methods Eng., 24(2), pp.359~373. 10.1002/nme.1620240207

Thomas, S., Li, Q., Steven, G. (2020) Topology Optimization for Periodic Multi-Component Structures with Stiffness and Frequency Criteria, Struct. Multidiscip. Optim., 61(6), pp. 2271~2289. 10.1007/s00158-019-02481-7

Yoon, G.H., Kim, Y.Y., Langelaar, M., van Keulen, F. (2008) Theoretical Aspects of the Internal Element Connectivity Parameterization Approach for Topology Optimization, Int. J. Numer. Methods Eng., 76(6), pp.775~797. 10.1002/nme.2342

Zhu, J., Zhang, W., Beckers, P. (2009) Integrated Layout Design of Multi-Component System, Int. J. Numer. Methods Eng., 78(6), pp.631~651. 10.1002/nme.2499

Information

Publisher :Computational Structural Engineering Institute of Korea
Publisher(Ko) :한국전산구조공학회
Journal Title :Journal of the Computational Structural Engineering Institute of Korea
Journal Title(Ko) :한국전산구조공학회 논문집
Volume : 35
No :6
Pages :343-349
Received Date : 2022-09-27
Revised Date : 2022-10-31
Accepted Date : 2022-10-31
DOI :https://doi.org/10.7734/COSEIK.2022.35.6.343

Journal of the Computational Structural Engineering Institute of Korea ISSN:1229-3059(Print) 2287-2302(Online) 한국전산구조공학회 논문집

All Issue