Temperature-Dependent Viscoplastic-Damage Constitutive Model for Nonlinear Compressive Behavior of Polyurethane Foam

Jeong-Ho Lee; Seul-Kee Kim; Jae-Myung Lee

doi:10.7734/COSEIK.2016.29.5.437

All Issue

2016 Vol.29, Issue 5 Preview Page Next Page

Temperature-Dependent Viscoplastic-Damage Constitutive Model for Nonlinear Compressive Behavior of Polyurethane Foam 폴리우레탄 폼 비선형 압축 거동 해석용 온도 의존 손상 점소성 구성방정식

2016. pp. 437-445

PDF XML

Abstract

Recently, polyurethane foam has been used in various industry fields to preserve temperature environment of structures, and a wide range of loads from the static to the dynamic are imposed on the material during a life period. The biggest characteristic of polyurethane foam is porosity as being polymeric material, and it is generally known that insulation performance of the material strongly depends on internal void size. In addition, polyurethane foam’s mechanical behavior has high dependence on strain rate and temperature as well as being highly non-linear ductile for compression. In the non-linear compressive behavior, volume fraction of voids and elastic modulus decrease as strain increases. Therefore, in this study, temperature-dependent viscoplastic-damage constitutive model was developed to describe the non-linear compressive behavior with the aforementioned features of polyurethane foam.

Keywords

polyurethane foam

compressive behavior dependent on strain rate and temperature

constitutive model

ABAQUS user-defined material subroutine

현재 많은 산업에서 구조물의 온도환경 유지를 위한 단열재로 폴리우레탄 폼이 사용되며, 수명 동안 정적 및 동적의 다양 한 하중이 이에 부과된다. 폴리우레탄 폼은 고분자재료로써 다공성이며, 단열성능은 내부기공의 크기에 크게 의존한다. 또 한, 폴리우레탄 폼의 기계적 거동은 변형률 속도 및 온도에 대한 의존성이 큰 동시에 압축에 대하여 큰 비선형 연성거동을 보인다. 이러한 비선형 연성 압축거동 중에 폴리우레탄 폼은 변형률의 증가에 따라 기공율과 탄성계수의 감소를 보인다. 따 라서 본 연구에서는 상기 특성들을 포함한 폴리우레탄 폼의 변형률 속도 및 온도 의존 비선형 압축거동을 모사하기 위하여 온도 의존 손상 점소성 구성방정식이 개발되었다.

키워드

폴리우레탄 폼

변형률 속도 및 온도 의존 압축거동

구성방정식

아바쿠스 사용자 정의 서브루틴

References

References

H Altenbach and T Sadowski, Failure and Damage Analysis of Advanced Materials; 278, Vienna. Springer. (2014)

A Demharter, Cryogenics, Polyurethane Rigid Foam, A Proven Thermal Insulating Material for Applications between +130℃ and -196℃, 38(1); 113-117 (1998)

MA Di Prima, M Lesniewski, K Gall, DL McDowell, T Sanderson and D Campbell, Smart Mater. & Struct, Thermo-Mechanical behavior of Epoxy Shape Memory Polymer Foams, 16(6); 2330-2340 (2007)

10.1088/0964-1726/16/6/037

AL Gurson, J. Eng. Mater. & Tech, Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I— Yield Criteria and Flow Rules for Porous Ductile Media, 99(1); 2-15 (1977)

10.1115/1.3443401

C Hou, K Czubernat, SY Jin, W Altenhof, E Maeva, I Seviaryna, S Bandyopadhyay- Ghosh, M Sain and R Gu, Int. J. Fatigue, Mechanical Response of Hard Bio-based PU Foams under Cyclic Quasi-static Compressive Loading Conditions, 59; 76-89 (2014)

10.1016/j.ijfatigue.2013.09.012

AS Khan and R Liang, Int. J. Plast, Behaviors of Three BCC Metal over a Wide Range of Strain Rates and Temperatures: Experiments and Modeling, 15(10); 1089-1109 (1999)

10.1016/S0749-6419(99)00030-3

CS Lee and JM Lee, J. Compos. Mater, Anisotropic Elastoviscoplastic Damage Model for Glass-fiber Reinforced Polyurethane Foam, 48(27); 3367-3380 (2014)

10.1177/0021998313509863

JH Lee, SK Kim, SB Park, CS Bang and JM Lee, Macromol. Mater. & Eng, Application of Gurson Model for Evaluation of Density-Dependent Mechanical Behavior of Polyurethane Foam: Comparative Study on Explicit and Implicit Method, 301(6); 694-706 (2016)

10.1002/mame.201500431

J Lemaitre, J. Eng. Mater. & Tech, A Continuous Damage Mechanics Model for Ductile Fracture, 107(1); 83-89 (1985)

10.1115/1.3225775

GT Lim, V Altstädt and F Ramsteiner, J. Cell. Plast, Understanding the Compressive behavior of Linear and Cross-linked Poly(vinyl chloride) Foams, 45; 419-439 (2009)

10.1177/0021955X09105372

E Linul, L Marsavina, T Voiconi and T Sadowski, Int. J. Phys.: Conf. Ser, Study of Factors Influencing the Mechanical Properties of Polyurethane Foams under Dynamic Compression, 451(1); 012002, IOP Publishing (2013)

10.1088/1742-6596/451/1/012002

H Luo, Y Zhang, B Wang and H Lu, J. Offshore Mech. & Arctic Eng, Characterization of the Compressive behavior of Glass Fiber Reinforced Polyurethane Foam at Different Strain Rates, 132(2); 021301 (2010)

10.1115/1.4000396

M Modesti, A Lorenzetti and S Besco, Polym. Eng. & Sci, Influence of Nanofillers on Thermal Insulating Properties of Polyurethane Nanocomposites Foams, 47(9); 1351-1358 (2007)

10.1002/pen.20819

V Tvergaard and A Needleman, Acta Metall, Analysis of the Cup-cone Fracture in a Round Tensile Bar, 32(1); 157-169 (1984)

10.1016/0001-6160(84)90213-X

Information

Publisher :Computational Structural Engineering Institute of Korea
Publisher(Ko) :한국전산구조공학회
Journal Title :Journal of the Computational Structural Engineering Institute of Korea
Journal Title(Ko) :한국전산구조공학회 논문집
Volume : 29
No :5
Pages :437-445
Received Date : 2016-08-01
Revised Date : 2016-09-26
Accepted Date : 2016-09-27
DOI :https://doi.org/10.7734/COSEIK.2016.29.5.437

Journal of the Computational Structural Engineering Institute of Korea ISSN:1229-3059(Print) 2287-2302(Online) 한국전산구조공학회 논문집

All Issue

References