All Issue

2014 Vol.27, Issue 6 Preview Page
Analytical Models of Beam-Column joints in a Unit Modular Frame

단위 모듈러 구조체의 보-기둥 접합부 해석 모델

Choi Kyung-Suk
,
Kim Hyung-Joon†*
Department of Architectural Engineering, University of Seoul, Seoul, 130-743, Korea
Department of Architectural Engineering, University of Seoul, Seoul, 130-743, Korea
•*Corresponding author Kim, Hyung-Joon hyungjoonkim@uos.ac.kr
2014. pp. 663-672
PDF XML Citation
Abstract

Recently, modular structural systems have been applicable to building construction since they can significantly reduce building construction time. They consists of several unit modular frames of which each beam-column joint employs an access hole for connecting unit modular frames. Their structural design is usually carried out under the assumption that their load-carrying mechanism is similar to that of a traditional steel moment-resisting system. In order to obtain the validation of this assumption, the cyclic characteristics of beam-column joints in a unit modular frame should be investigate. This study carried out finite element analyses(FEM) of unit modular frames to investigate the cyclic behavior of beam-column joints with the structural influence of access holes. Analysis results show that the unit modular frames present stable cyclic response with large deformation capacities and their joints are classified into partial moment connections. Also, this study develops a simple spring model for earthquake nonlinear analyses and suggests the Ramberg-Osgood hysteretic rule to capture the cyclic response of unit modular frames

최근, 모듈러 구조 시스템은 공기를 단축시킬 수 있는 장점으로 인해 건설 현장에 적용되고 있다. 모듈러 구조시스템은 단위 모듈로 구성되며, 모듈과 모듈의 볼트접합을 위해 보-기둥 접합부에 개구부를 가공하게 된다. 일반적으로 모듈러 구조시스템은 기존 철골모멘트골조와 유사한 하중전달체계를 가지는 것으로 가정하여 설계된다. 이와 같은 설계 가정의 타당성을 확보하기 위해, 단위 모듈의 보-기둥 접합부에 대한 회전 성능이 파악되어야 한다. 본 연구에서는 개구부의 구조적 영향이 고려된 접합부의 회전성능을 파악하기 위해 유한요소해석을 수행하였다. 해석결과 단위모듈은 충분한 변형능력을 가지고 안정적인 이력거동을 하는 것으로 나타났으며, 단위모듈의 접합부는 부분강접 접합부로 분류되었다. 또한 본 연구에서는 단위 모듈의 비선형 골조 해석을 위한 간단한 스프링 모델을 개발하였으며, 단위 모듈의 비선형 이력 거동을 구현하기 위해 Ramberg-Osgood 이력 모델을 제시하였다.

Keywords
unit modular frame, steel moment connection, nonlinear analytical model, moment-rotation relation
단위 모듈 구조체, 철골 모멘트 접합부, 비선형 해석 모델, 모멘트-회전각 관계
References
1
ABAQUS 6.10 2010Analysis User's ManualDassault Systemes Simulia Corp.Providence, RI, USA.
2
AIK2010Korean Building Code 2009 (KBC 2009)Architectural Institute of Korea, Seoul.
3
AISC2005Seismic Provisions for Structural Steel BuildingsAmerical Institute of Steel ConstructionChicago, IL, USA.
4
T.H., Almusallam and R.M., Richard, 1993. Steel Frame Analysis with Flexible Joints Exhibiting a Strain- softening Behavior. Comput. &Struct., 46, pp.55-65.
10.1016/0045-7949(93)90167-C
5
K.M., Ang and G.A., Morris, 1984. Analysis of Three- dimensional Frames with Flexible Beam-column Connections. Columns with Semi-Rigid Joints, Canadian J. Civil Eng., pp.245-254.
10.1139/l84-037
6
C.D., Annan, M.A., Youssef and M.H., El Naggar, 2009. Experimental Evaluation of the Seismic Performance of Modular Steel-braced Frames. Eng. Struct., 31, pp.1435-1446.
10.1016/j.engstruct.2009.02.024
7
Carr A.J. 2000RUAUMOKO Manual Volume 2: User Manual for the 2-Dimensional Version Ruaumoko 2DUniversity of CanterburyChristchurch, New Zealand.
8
CEN. EN. 1993-1-8.2005Eurocode 3: Design of Steel Structures, Part 1.8: Design of Joint, British Standards InstitutionLondon, England
9
D.J., Fielding and J.S., Huang, 1971. Shear in Steel Beam-to-column Connections. Welding Journal, 50, pp.313-326.
10
M.J., Frye and G.A., Morris, 1976. Analysis of Flexible Connected Steel Frames. Canadian J. Civil Eng., 2, pp.280-291.
10.1139/l75-026
11
M.F., Giberson, 1969. Two Nonlinear Beams with Definition of Ductility. J. Struct. Div., ASCE, 95, pp.137-157.
12
Gorgolewski M.T. Grubb P.J. Lawson R.M. 2001Modular Construction Using Light Steel Framing : Design of Residential Buildings,Steel Construction InstitutBerkshire, England.
13
S.G., Hong, 2014. Structural Design Guidelines for Middle to High-rise Modular Buildings for Architects and Engineers. Rev. Archi. &Build. Sci., 58, pp.15-19.
14
S.G., Hong, B.H., Cho, K.S., Chung and J.H., Moon, 2011. Behavior of Framed Modular Building System with Double Skin Steel Panels. J. Constr. Steel Res., 67, pp.936-946.
10.1016/j.jcsr.2011.02.002
15
S.W., Jones and P.A., Kirby, 1982. Columns with Semi-Rigid Joints. J. Struct. Div., ASCE,, 108, pp.361-372.
16
D.Y., Kim and H.C., Noh, 2013. Probabilistic Nonlinear Analysis of Semi-Rigid Frames Considering Random Elastic Modulus. J. Comput. Struct. Eng. Inst. Korea, 26, pp.191-198.
10.7734/COSEIK.2013.26.3.191
17
H., Krawinkler, 1978. Shear in Beam-column Joints in Seismic Design of Steel Frames. Eng. J., 15, pp.82-91.
18
R.M., Lawson, R.G., Ogden and R., Bergin, 2012. Application for Modular Construction in High-Rise Buildings. J. Archi. Eng., 18, pp.148-156.
10.1061/(ASCE)AE.1943-5568.0000057
19
E.M., Lui and W.F., Chen, 1987. Steel Frame Analysis with Flexible Joints. J. Constr. Steel Res., 8, pp.161-202.
10.1016/0143-974X(87)90058-7
20
C.H., Yu and N.E., Shanmugam, 1986. Stability of Frames with Semirigid Joints. Comput. &Struct.,, 23, pp.639-648.
10.1016/0045-7949(86)90071-4
Information
  • Publisher :Computational Structural Engineering Institute of Korea
  • Publisher(Ko) :한국전산구조공학회
  • Journal Title :Journal of the Computational Structural Engineering Institute of Korea
  • Journal Title(Ko) :한국전산구조공학회 논문집
  • Volume : 27
  • No :6
  • Pages :663-672
  • Received Date : 2014-11-11
  • Revised Date : 2014-11-24
  • Accepted Date : 2014-11-25
  • DOI :https://doi.org/10.7734/COSEIK.2014.27.6.663
Journal Informaiton Journal of the Computational Structural Engineering Institute of Korea Journal of the Computational Structural Engineering Institute of Korea
Online Submission
  • scopus
  • NRF
  • KOFST
  • crossref crossmark
  • crossref cited-by
  • crosscheck
  • orcid
  • open access
  • ccl
Journal Informaiton Journal Informaiton - close