Computation of Energy Release Rates for Slender Beam through Recovery Analysis and Virtual Crack Closure Technique

Jun Hwan Jang; Hoi-Min Koo; Sang Ho Ahn

doi:10.7734/COSEIK.2017.30.1.31

All Issue

2017 Vol.30, Issue 1 Preview Page Next Page

Research Paper

Computation of Energy Release Rates for Slender Beam through Recovery Analysis and Virtual Crack Closure Technique 차원 복원해석과 가상균열닫힘 기법을 이용한 종방향 균열을 가진 세장비가 큰 보의 에너지 해방률 계산

28 February 2017. pp. 31-37

PDF XML

Abstract

In this paper, computation results of reducible modeling, stress recovery and energy release rate were compared with the results of VABS, Virtual Crack Closure Technique. The result of stress recovery analysis for 1-D model including the stiffness matrix is compared with stress results of three-dimensional 3-D FEM. Energy release rate of composite beam with longitudinal cracks is calculated and compare verifications of numerical analysis results of 3-D FEM and VABS. The procedure of calculating energy release rate through dimensional reduction and stress recovery is intended to be efficient and be utilized in the life-cycle of high-altitude uav’s wing, wind blades and tilt rotor blade.

Keywords

cross-sectional analysis

reducible modeling

recovery analysis

virtual crack closure technique

본 논문에서는 이종재질로 구성된 세장비가 큰 보의 차원축소와 복원의 효율성과 정확성을 입증하기 위하여 VABS와 3차원 유한요소해석 모델의 결과와 비교하였다. 그리고 3차원 유한요소모델과 차원축소 모델을 가상균열닫힘법을 이용하여 에너지 해방률을 계산하였다. 원형과 사각형의 단면에 초기 크랙을 가진 수치모델을 이용하여 보의 차원축소와 복원기법 및 가상균 열닫힘법을 이용하여 복원해석 결과 및 에너지 해방률을 비교하여 효율성과 정확성을 입증하였다. 특히 제시된 에너지 해방률 계산 기법은 고고도 무인기의 날개, 헬리콥터 로터 블레이드, 풍력 블레이드, 틸트로터 등의 정적, 동적 모델링 및 수명평가에 활용될 수 있을 것이다.

키워드

단면해석

차원축소 모델링

복원해석

가상균열닫힘법

References

Ahn, J.S., Woo, K.S. (2012) Mixed Mode Analysis using Two-step Extension Based VCCT in an Inclined Center Crack Repaired by Composite Patching, J. Korean Soc. Civil Eng. A, 32, pp.11~18.

Blasques, J.P., Bitsche, R.D. (2015) An Efficient and Accurate Method for Computation of Energy Release Rates in Beam Structures with Longitudinal Cracks, Eng. Fract. Mech., 133, pp.56∼69. 10.1016/j.engfracmech.2014.11.002

10.1016/j.engfracmech.2014.11.002

Burlayenko, V.N., Altenbach, H., Sadowski, T., Dimitrova, S.D. (2016) Computational Simulations of Thermal Shock Cracking by the Virtual Crack Closure Technique in a Functionally Graded Plate, Comput. Mater. Sci., 116, pp.11∼21. 10.1016/j.commatsci.2015.08.038

10.1016/j.commatsci.2015.08.038

Chen, H., Yu, W., Capellaro, M. (2009) A Critical Assessment of Computer Tools for Calculating Composite Wind Turbine Blade Properties, Wind Energy, 13, pp.497∼516. 10.1002/we.372

10.1002/we.372

Hodges, D.H. (2003) Geometrically-Exact, Intrinsic Theory for Dynamics of Curved and Twisted Anisotropic Beams, AIAA J., 41, pp.1131∼1137. 10.2514/2.2054

10.2514/2.2054

Hu, P. (2010) VABS-IDE: VABS-Enabled Integrated Design Environment(IDE) for Efficient High-Fidelity Composite Rotor Blade and Wing Design, 51^st, AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. American Institute of Aeronautics. 10.2514/6.2010-3063

10.2514/6.2010-3063

Hur, S.-P., Yang. W.-Ho, Kim, C., Ko, M.-H. (2001) Stress Intensity Factor Calculation of Elliptical Arc Through Cracks in Mechanical Joints by Virtual Crack Closure Technique, Korean Soc. Mech. Eng., pp.33~38.

Jang, J.H., Lee, H. (2015) Blade Analysis Library Development of Dimension Reducible Modeling and Recovery Analysis for Composite Rotor Blades, J. Korean Soc. Aeronaut. & Space Sci., 43, pp.920~927. 10.5139/JKSAS.2015.43.10.920

10.5139/JKSAS.2015.43.10.920

Murakami, Y. (1987) Stress Intensity Factors Handbook, Pergamon Presss.

Sun, Y., Liu, M. (2015) Analysis of the Crack Penetration/Deflection at the Interfaces in the Intelligent Coating System Utilizing Virtual Crack Closure Technique, Eng. Fract. Mech., 133, pp.152∼162. 10.1016/j.engfracmech.2014.11.010

10.1016/j.engfracmech.2014.11.010

Yu, W., Blair, M. (2012) GEBT: A General-Purpose Nonlinear Analysis Tool for Composite Beams, Composite Structures, 94(9), pp.2677∼2689. 10.1016/j.compstruct.2012.04.007

10.1016/j.compstruct.2012.04.007

Yu, W., Hodges, D.H., Ho, J. (2012) Variational Asymptotic Beam Sectional Analysis-An Updated Version, Int. J. Eng. Sci., 59, pp.40∼64. 10.1016/j.ijengsci.2012.03.006

10.1016/j.ijengsci.2012.03.006

Yu, W., Hodges, D.H., Ho, J.C. (2012) Variational Asymptotic Beam Sectional Analysis-An updated version, Int. J. Eng. Sci., 59, pp.40∼64. 10.1016/j.ijengsci.2012.03.006

10.1016/j.ijengsci.2012.03.006

Information

Publisher :Computational Structural Engineering Institute of Korea
Publisher(Ko) :한국전산구조공학회
Journal Title :Journal of the Computational Structural Engineering Institute of Korea
Journal Title(Ko) :한국전산구조공학회 논문집
Volume : 30
No :1
Pages :31-37
Received Date : 2016-10-23
Revised Date : 2016-12-02
Accepted Date : 2017-01-02
DOI :https://doi.org/10.7734/COSEIK.2017.30.1.31

Journal of the Computational Structural Engineering Institute of Korea 한국전산구조공학회 논문집 ISSN:1229-3059(Print) 2287-2302(Online)

All Issue