Prediction of the Mechanical behavior of Short-Fiber Reinforced Composite Structures using Compression Molding-Structural Coupled Analysis

Da-Young Jang; Geung-Hyeon Lee; Jang-Woo Han

doi:10.7734/COSEIK.2024.37.5.317

All Issue

2024 Vol.37, Issue 5 Preview Page Next Page

Research Paper

Prediction of the Mechanical behavior of Short-Fiber Reinforced Composite Structures using Compression Molding-Structural Coupled Analysis 압축 성형-구조 연계 해석을 활용한 단섬유 강화 복합소재 구조물의 기계적 거동 예측

31 October 2024. pp. 317-326

PDF XML

Abstract

In this paper, compression molding-structural coupled analysis was proposed to accurately consider the effect of initial compression molding conditions on the mechanical behavior of short-fiber reinforced composite structures. To this end, local short-fiber orientations depending on the initial charge conditions were investigated using compression molding analysis, and a mean-field homogenization scheme was employed to efficiently derive equivalent orthotropic material properties determined by short-fiber orientations. Furthermore, based on the refined finite element model with short-fiber orientation, compression molding-structural coupled analysis precisely described the locally independent mechanical behavior induced by initial molding conditions. Consequently, it could be confirmed that the proposed analysis model provides a reasonable solution in the design process of short-fiber reinforced composite structures manufactured by compression molding.

Keywords

composite structures

compression molding-structural coupled analysis

short-fiber orientation

orthotropic material property

본 논문에서는 초기 압축 성형 공정 조건들이 단섬유 강화 복합소재 구조물의 기계적 거동 특성에 미치는 영향을 효과적으로 반영할 수 있는 압축 성형-구조 연계 해석 방안을 제안하였다. 압축 성형 해석을 바탕으로 초기 charge의 형상 및 배치에 따른 부위별 단섬유 배향 특성을 분석하였으며, 평균장 균질화 이론을 통해 단섬유 배향 특성에 따른 등가 이방 물성을 도출하였다. 나아가, 단섬유 배향 정보가 Mapping된 유한요소 모델을 기반으로 초기 공정 조건들에 의해 야기되는 부위별 거동 특성 변화를 고려할 수 있는 압축 성형-구조 연계 해석을 진행하였다. 관련 수치 예제 검증을 통해 제시된 해석 방안은 압축 성형을 통해 제작된 단섬유 강화 복합소재 구조물 설계 과정에서 효과적인 솔루션을 제공함을 확인하였다.

키워드

복합소재 구조물

압축 성형-구조 연계해석

단섬유 배향

이방 물성

References

Advani, S.G., Tucker, C.L. (1987) The Use of Tensors to Describe and Predict Fiber Orientation in Short Fiber Composites, J. Rheol., 31(8), pp.751~784.

10.1122/1.549945

Bae, D.R., Lee, J.W., Yi, J.W., Um, M.K. (2018) Evaluation of Compression Molding Simulation with Compression Properties of Carbon Fiber Prepreg, Compos. Res., 31(6), p.421~428.

Folgar, F., Tucker, C.L. (1984) Orientation behavior of Fibers in Concentrated Suspensions, J. Reinf. Plast. & Compos., 3(2), pp.98~119.

10.1177/073168448400300201

Jang, K.S., Kim, T.R., Kim, J.H., Yun, G.J. (2022) Multi-scale Process-structural Analysis Considering the Stochastic Distribution of Material Properties in the Microstructure, Compos. Res., 35(3), pp.188~195.

Jeffery, G.B. (1922) The Motion of Ellipsoidal Particles Immersed in a Viscous Fluid, Proc. Royal Soc. London. Ser. A, Containing Papers of a Mathematical and Physical Character, 102(715), pp.161~179.

10.1098/rspa.1922.0078

Kim, M.S., Lee, W.I., Han, W.S., Vautrin, A., Park, C.H. (2009) Thickness Optimization of Composite Plates by Box's Complex Method Considering the Process and Material Parameters in Compression Molding of SMC, Compos. part A: Appl. Sci. & Manuf., 40(8), pp.1192~1198.

10.1016/j.compositesa.2009.05.003

Kim, W. (2023) Effect of Glass Fiber Orientation on Impact Fracture Properties: Coupled Injection Molding & Structural Analysis, Trans. Mater. Proc., 32(3), pp.129~135.

Kim, Y.M., Kim, Y.H. (2019) Coupled Analysis with Digimat for Realizing the Mechanical Behavior of Glass Fiber Reinforced Plastics, J. Comput. Struct. Eng. Inst. Korea, 32(6), pp.349~ 357.

10.7734/COSEIK.2019.32.6.349

Kim, Y.M., Kim, Y.H. (2020) A Study on the Fatigue Analysis of Glass Fiber Reinforced Plastics with Linear and Nonlinear Multi-Scale Material Modeling, J. Comput. Struct. Eng. Inst. Korea, 33(2), pp.81~93.

10.7734/COSEIK.2020.33.2.81

Kwak, S.H., Mun, J.H., Hong, S.H., Kwon, S.D., Kim, B.H., Kim, T.Y. (2021) Multi-stage Compression Molding Technology of Fast Curing CF/Epoxy Prepreg, Compos. Res., 34(5), pp.269~276.

Lee, J.M., Kim, B.M., Ko, D.C. (2016) CFRP Compression Forming Technology, Trans. Mater. Proc., 25(3), pp.203~208.

Lim, H.J., Choi, H., Yun, G.J. (2022) Multiscale Failure and Damage Analysis of Sheet Molding Compound (SMC) Composites using Micro-CT Image-based Reconstruction Model, Compos. Part B: Eng., 231, p.109593.

10.1016/j.compositesb.2021.109593

Meyer, N., Schöttl, L., Bretz, L., Hrymak, A.N., Kärger, L. (2020) Direct Bundle Simulation Approach for the Compression Molding Process of Sheet Molding Compound, Compos. Part A: Appl. Sci. & Manuf., 132, p.105809.

10.1016/j.compositesa.2020.105809

Mohammadkhani, P., Magliaro, J., Rahimidehgolan, F., Khapra, T., Altenhof, W. (2023) Moisture Influence on Anisotropic Mechanical behavior of Direct Compounded Compression Molded PA6/Glass LFTs, Compos. Part B: Eng., 264, p.110927.

10.1016/j.compositesb.2023.110927

Song, Y., Gandhi, U., Sekito, T., Vaidya, U.K., Vallury, S., Yang, A., Osswald, T. (2018) CAE Method for Compression Molding of Carbon Fiber-Reinforced Thermoplastic Composite using Bulk Materials, Compos. Part A: Appl. Sci. & Manuf., 114, pp.388~397.

10.1016/j.compositesa.2018.09.002

Sun, X., Li, Y., Engler-Pinto, C., Huang, L., Huang, S., Li, Z., Han, W. (2022) Characterization and Modeling of Fatigue behavior of Chopped Glass Fiber Reinforced Sheet Molding Compound (SMC) Composite, Int. J. Fatigue, 156, p.106647.

10.1016/j.ijfatigue.2021.106647

Tseng, H.C., Chang, R.Y, Hsu, C.H. (2017) Improved Fiber Orientation Predictions for Injection Molded Fiber Composites, Compos. Part A: Appl. Sci. & Manuf., 99, pp.65~75.

10.1016/j.compositesa.2017.04.004

Information

Publisher :Computational Structural Engineering Institute of Korea
Publisher(Ko) :한국전산구조공학회
Journal Title :Journal of the Computational Structural Engineering Institute of Korea
Journal Title(Ko) :한국전산구조공학회 논문집
Volume : 37
No :5
Pages :317-326
Received Date : 2024-06-24
Revised Date : 2024-08-13
Accepted Date : 2024-08-16
DOI :https://doi.org/10.7734/COSEIK.2024.37.5.317

Journal of the Computational Structural Engineering Institute of Korea ISSN:1229-3059(Print) 2287-2302(Online) 한국전산구조공학회 논문집

All Issue